C5FG26F1 - 307
REMOVAL - REFITTING UPPER CENTER FACADE
1 - REMOVAL
Unscrew:
radio
cd drive 5 or box ISO (according to technical values)
SUB CENTER FACADE (C5FG2CF1 - 307)
Unscrew:
2 gaskets or side (1) upper control arms
fixing (4) 2 screws
Remove the middle panel.
Disconnect the connectors.
Remove the upper center facade (3).
2 - REFITTING
Follow the removal steps in reverse order.
Check the operation of electrical equipment.
REMOVAL - INSERTION BOTTOM MIDDLE PANEL AND ASH SECTION
1 - REMOVAL
Unscrew:
radio
cd drive 5 or box ISO (according to specified technical value)
cigarette ashtray
Unscrew:
2 fixing elements (1)
rubber covering of the lower middle storage compartment (2)
Remove:
gear lever gaiter
upper part of lower middle panel
Without damaging the bellows, put the gear lever gaiter around the panel (3).
Remove the lower middle panel (3).
Remove the ashtray box after detaching the illuminator.
2 - REFITTING
After adjusting the position of the illuminator, reattach the ashtray box.
Fit the bottom panel foot (3) on the base console: at (A).
Clip it from the top.
Continue inserting by following the reverse order of removal steps.
Haşim Ayaz hasimayaz@gmail.com